Seven Segment 4 Digit

Seven segment 4 Digit display Multiplex in electronic device applications is drain port  a micro controller or data point that will be on display, especially if the data to be displayed more than 1 digit. necessary path to control the resources of each 7 segment and the path to input data on the 7 segment. Circuit 7 Segment 4 Digit Multiplex is a way to save the port or micro controller data path that will be displayed. Series Display 7 Segment 4 Digit Multiplex uses BCD to 7 segment decoder 74LS247 BCD to encode data from the data that will be displayed, then for each resource viewer 7 segment using the set of transistors as electronic switches. Current flowing in the viewer in a series of 7 segment Display 7 Segment 4 Digit Multiplex is in limiting use yag resistor in series pairs in each collector transistor.

 

Resistors are mounted in series of LED is used as a barrier for current flow that flows through the LED does not exceed the maximum allowable, current that is equal to 20 mA.

Read More

4 Channels Home Audio Power Amplifier

This is a minimal circuit. right management a single IC, but the amplifier has 4 channels, 11 channels apiece watt, which is Philips IC TDA1554 run to apposite in support of listening by the side of land of your birth otherwise dressed in one vehicle. Just since the power supply 12-15 volt otherwise yearn for transpire used to open out any home acting sound organization. The at the outset 2-channel amplifier front speakers. And 2 to widen the back surround sound speakers additionally.

4 Channels Home Audio Power Amplifier

This circuit power supply 12 volts to 18 volts Power consumption next to 5A. The input 4 input pins 1, 2, 17 and 18 is not speaking into a horizontal input inverter Ting 2 channels (Pin 1, 17). inverse classic and input object 2 channels (pins 2, 6). with the purpose of we can function that. To output point to phase or else did not return. The output self-control be there the fourth slot on the crutch 6, 8, 12, 10, with a C7-C10 serves to boost the low frequency stability better in the past you die to the loudspeaker. The switch S1 acts on mute by urgent S1 will be stopped sound procedure circuit here Mute, and if unfasten circuit S1 supply on the point of to masterpiece. The C5 and C6 bidding filter light to smooth absent and eliminate interference.

Read More

4 x 12 W power amplifier with dynamic distortion detector and diagnostic interface

FEATURES
Requires very few external components
High output power
Fixed gain
Diagnostic facility (distortion, short-circuit and temperature detection)
Good ripple rejection
Mode select switch (operating, mute and stand-by)
Load dump protection
AC and DC short-circuit safe to ground and to VP
Low power dissipation in any short-circuit condition
Thermally protected
Reverse polarity safe
Electrostatic discharge protection
No switch-on/switch-off plop
Flexible leads
Low thermal resistance
Identical inputs.

GENERAL DESCRIPTION

The TDA8562Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package. It contains 4 × 12 W single-ended amplifiers.

Circuit Diagram

4 x 12 W power amplifier with dynamic distortion detector and diagnostic interface

Read More

Samsung will introduce the Galaxy Note 4 on 3 September

It is expected that Samsung present its new phone Samsung Galaxy Note 4 officially in September during IFA 2014 event held in Berlin, Germany. Now, the Korean media already have an exact date of this phone Samsung.

According to The Korea Times, Samsung will be announcing the Galaxy Note 4 on September 3, a day before the presentation of the Galaxy Note 3 last year.

Samsung is expected to start sending invitations to the event "soon", including that the company would be a bit rushed to launch its new mobile big Lcd because Apple is finally breaking its tradition of offering only one size cell relatively small as the iPhone 6 to gain entry to the high-end market. It is said that Samsung is trying to get the Galaxy Note sale 4 days before what went on Galaxy Note 3 with this same purpose.

It is expected that the Samsung Galaxy Note 4 has a QHD (2560 × 1440) 5.7 inch Lcd, a Snapdragon 805 / Exynos 5433 processor, 3GB of RAM and a 16 megapixel camera that would include the Sony IMX240 sensor. Additionally, he said that the Samsung Galaxy Note 4 would an ultraviolet sensor and Android KitKat.

Read More

4 x 11 W single ended car radio power amplifier

FEATURES

Requires very few external components

Flexibility in use Quad single-ended or stereo BTL

High output power

Low offset voltage at output (important for BTL)

Fixed gain

Good ripple rejection

Mute/stand-by switch

Load dump protection

AC and DC short-circuit-safe to ground and VP

Thermally protected

Reverse polarity safe

Capability to handle high energy on outputs (VP = 0)

Protected against electrostatic discharge

No switch-on/switch-off plop

Flexible leads

Low thermal resistance

Identical inputs (inverting and non-inverting).

GENERAL DESCRIPTION

The TDA1558Q is a monolithic integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The device contains 4 x 11 W single-ended or 2 x 22 W BTL amplifiers and has been primarily developed for car radio applications.

Circuit Diagram

Circuit diagram for  4 x 11 W single-ended car radio power amplifier

Read More

4 x 13 W single ended power amplifiers

FEATURES

Requires very few external components

High output power

Fixed gain

Diagnostic facility (distortion, short-circuit and temperature detection)

Good ripple rejection

Mode select switch (operating, mute and standby)

AC and DC short-circuit safe to ground and to VP

Low power dissipation in any short-circuit condition

Thermally protected

Reverse polarity safe

Electrostatic discharge protection

No switch-on/switch-off plop

Flexible leads

Low thermal resistance

Identical inputs.

GENERAL DESCRIPTION

The TDA8511J is an integrated class-B output amplifier in a 17-lead DIL-bent-SIL power package. It contains 4 × 13 W single-ended amplifiers.

Circuit Diagram:

4 x 13 W single-ended power amplifiers

Read More