Thursday, October 16, 2014

5V 2A Dc Converter Using LT3980

Using LT3980 manufactured by Linear Technology can be designed a very simple 5 volts dc converter circuit.

5V 2A Dc Converter Circuit Diagram



The LT3980 has an adjustable frequency from 100kHz to 2.4MHz and accepts input voltages up to 58V . The transient voltage of the LT3980 is around 80 volts . The maximum output current which can be delivered by the LT3980 monolithic buck switching regulator is around 2 Amps .

Main features of the LT3980 monolithic buck switching regulator are : wide input range from 3.6V to 58V , overvoltage lockout protects circuits through 80V transients , 2A Maximum Output Current , low ripple (<15mvp-p) burst mode, aadjustable switching frequency: 100khz to 2.4mhz ,low shutdown current: iq <1μa, thermal protection, soft-start capability 

Related Posts:

  • 5V 2A Dc Converter Using LT3980Using LT3980 manufactured by Linear Technology can be designed a very simple 5 volts dc converter circuit.5V 2A Dc Converter Circuit DiagramThe LT3980 has an adjustable frequency from 100kHz to 2.4MHz and accepts input voltag… Read More
  • Build a Regulated driven Converter Wiring diagram SchematicHow to Build a Regulated driven Converter Circuit Diagram?.This converter delivers up to 50 mA from a 6-V battery with 78% efficiency. This flyback converter functions by feedback-controlling the frequency of inductive flybac… Read More
  • SW Converter for Digital AM Car RadioSW Converter for Digital AM Car Radio Circuit Diagram This schema is purposely presented with many loose ends (not literally, of course) to stimulate experimenting with RF schemary at a small outlay. Looking at the schema dia… Read More
  • Valve Sound Converter Wiring diagram Schematic‘Valve sound’ is not just an anachronism: there are those who remain ardent lovers of the quality of sound produced by a valve amplifier. However, not everyone is inclined to splash out on an expensive valve output stage or c… Read More
  • How to Build a Photodiode current to voltage converterThe Photodiode current-to-voltage converter schema uses three CA3130 BiMOS op amps in an application sensitive to sub-picoampere input currents. The schema provides a ground-referenced output voltage proportional to input cur… Read More

0 comments:

Post a Comment

Note: Only a member of this blog may post a comment.